Rivets's latest activity

  • R
    This may sound stupid, but the one thing i’ve done to solve this problem is to drop the Hertz down-to 59-60. Do this by droppingthe...
  • R
    Rivets replied to the thread John Deere lt160 and stx 30 owner.
    Welcome to this forum. Couple of things that will help us help you. First, please the problem with each mower in its own thread. This...
  • R
    Rivets replied to the thread Coil resistance.
    Resistance values for today’s CDI models are of little use, hence they are not published. They contain hall effect sensors which can...
  • R
    Rivets replied to the thread Troy Bilt RZT50 Wiring Diagram.
    Hope this is some help. https://www.scribd.com/doc/76302149/Cub-Cadet-RZT-Series-Zero-Turn-Service-Repair-Manual-1#page=29
  • R
    Rivets replied to the thread Tecumseh HH60.
    I’ve asked twice how you tested to locate the problem. It was even asked what the original problem was. Those questions were never...
  • R
    DF, you didn’t read my post correctly. I said i could make $500 a week working only the hours I want. Two weeks ago I got a call to...
  • R
    Rivets replied to the thread Tecumseh HH60.
    This thread is starting to look a little goofy. OP does not answer all questions, pictures supplied show a unit that is too clean and...
  • R
    Rivets replied to the thread Tecumseh HH60.
    Unless you tell us how you have tested the charging system to determine what arts you need there is not much more we can help you...
  • R
    Rivets replied to the thread Tecumseh HH60.
    This website has a parts breakdown for that assembly. Which part are you looking for...
  • R
    Rivets replied to the thread Tecumseh HH60.
    I know this is a long shot, but does anything in this photo look like what you want.
    • 1793129776351.jpeg
  • R
    Rivets replied to the thread Tecumseh HH60.
    Two more questions. Does the part you are looking for mount underneath or outside the flywheel? If underneath, does it have both a...
  • R
    Rivets replied to the thread Tecumseh HH60.
    Ok, now I’ve got a better idea of what you are working on. I haven’t seen one of these setups in over 20 years. From what you are now...
  • R
    Rivets replied to the thread Tecumseh HH60.
    If you have replaced the points, condenser and the coil, you only have the laminated core to replace and you have rebuilt the entire...
  • R
    Rivets replied to the thread Tecumseh HH60.
    I have found the parts I listed available on multiple websites. My experience with trying to upgrade Tecumseh engines with the CDI...
  • R
    Triplicate poat. One is all you need unless you want to =&-#:95 off the good techs on this site.
Back
Top