Rivets's latest activity

  • R
    Section 8, starting on page 20 of this manual describes how to do it. Shouldn’t be very hard. https://www.toro.com/getpub/22446
  • R
    Rivets replied to the thread K301.
    Hammer makes a good point, battery or magneto? 301 came with both systems "
  • R
    Rivets replied to the thread K301.
    The first 10 pages give you a good overview on how the magneto ignition system works. I don’t know how much more I will need. The only...
  • R
    Rivets replied to the thread When a battery is really DEAD.
    Sounds like your charging system is not working. With engine running, at full speed, and no blade engagement, measure voltage across...
  • R
    Rivets replied to the thread 19hp Briggs carb float.
    We need model, type and code numbers. Should be stamped on one of the valve covers.
  • R
    Rivets replied to the thread K301.
    Please post engine spec number so we know which electrical setup you have. This manual may be of some help. Section 8. Im assuming...
  • R
    Rivets replied to the thread husqvarna z254f transmissions.
    If pulley bearings are bad the belt will not have the proper tension and will wear faster and jump off.
  • R
    Rivets replied to the thread husqvarna z254f transmissions.
    Sounds like rocks in pulley? Bad bearings.
  • R
    Rivets replied to the thread badboy mz magnum.
    Try this procedure to identify your problem. Post back with results. Electrical problems can be very easy or very difficult, depending...
  • R
    Rivets replied to the thread New Homeowners purchasing TS348XD.
    Experience has told me with these tractors adding attachments is not worth the money. They are lawn tractors. The only accessories I...
  • R
    If you properly maintain it, my experience says maximum of 5 years. If you get more than that you’ve got your money’s worth.
  • R
    Rivets replied to the thread 2544 metal rod location.
    That is a belt guide. In this manual go to page 16, part number 10. Should be mounted close enough to the pulley that so the belt will...
  • R
    Rivets replied to the thread Z149 dies with parking brake off.
    Congrats, your patience and double checking paid off.
  • R
    Rivets replied to the thread Carb Cleaning Question.
    Used an ultrasonic cleaner since they came out, probably can count on one hand when they haven’t worked for me when used properly.
  • R
    Rivets replied to the thread Carb Cleaning Question.
    Simple answer, YES. Should add, google search “HOW DOES AN ULTRASONIC CLEANER WORK “. It should answer your questions.
Back
Top