Rivets's latest activity

Boy you’re making a lot of fuss on a piece of equipment that’s leaking fuel!!! Maybe if you would spend a little time telling us where...

Best advice I can give you is to take the engine numbers to a Scag dealer and see if they can back check which models use that engine...

I’ve been servicing mowers for 50 years and Craftsman is a mower I would never recommend. A steel deck mower will never last 20 years...

All depends what the type of use, keeping the deck top and bottom clean, checking all pulleys, etc. Most manufacturers recommend...

Verify that the guide has moved before replacing the head. As I stated the guide does protrude above the head base. A good repair shop...

Two different starters were used on that model engine, depending on the manufacturing date. I suggest you do one of two things. Go to...

Sgkent, that is the vent as Star stated, not fuel inlet. Fuel will also leak out the fuel vent if the gasket between the carb body and...

This manual may help you out. Valve guides are above the head body. https://www.hunterlomison.com/pdfs/0C8221.pdf

Lawn boy parts number 100-2948.

Working in a trade school I had access to many different types of materials. Metal formed very easily, but the environment of a shop...

Metal was a material I tried, but found that it would not hold its form. Easily distorted especially the area around the filter. Plus...

Back when I was teaching, ran into this problem on a wide variety of engines. Made about a half dozen what I call oil troughs. Here’s...

If it had wheels, they would have been mounted on front backets on each side. All I find online is they have a free floating deck.

No deck wheels.

I’ve run the mulching setup year round for the last 30 years and have never had a problem. I like the way it the yard looks after each...