Rivets's latest activity

Not up, but out to create more tension on the spring.

Since you supply us with very little info, it is impossible for us to even make a guess. We don’t know the type of blade you have, Star...

I would take a needle nose pliers and bend the metal your finger is on in the first photo. Bend it approximately an 1/8” out to expand...

Try this one...

Google search using the part number I listed shows many available.

I don’t know where you got those part numbers, but when I search your model number I come up with part number 581747804 for the rear door.

The experienced techs on this forum hate guessing when we have so little information. Without having all engine numbers we have no idea...

Those gears are over the hill and need replacing. Toro part number 131-5399. In your other thread you stated they were in good, no...

Harmonic ringing on an electric mower is normally caused by either a blade which is unbalanced or a motor going bad. I would remove the...

Snapper used about a half dozen different discs. Need model number to determine which one you need.

Time to punt! You need to get the deck out from under the tractor and evaluate the problem. There may be a problem with the deck. Are...

If you have no voltage in step three, that would indicate to me you need to check the following. This is the times where even...

I’m NOT saying go purchase more parts with out doing more investigation. It would be much easier if I was standing next to see what...

After watching the video again and looking at the parts diagram I’ve got more questions than suggestions. When you replaced parts, did...

In the video I see two things I don’t like. One, the large idler pulley is at an angle. The idler tensioner arm may be bent. Second...