Rivets's latest activity
-
RRivets replied to the thread 22" Toro 20333 rear wheel drive personal pace recycler. The BBC belt broke.Maybe this manual will help you out. https://www.toro.com/getpub/22446
-
RRivets replied to the thread Toro 22" self propelled pinion gear on axle seized!!.Maybe this manual will help you out. https://www.toro.com/getpub/22446
-
RRivets replied to the thread Lawn-boy model 10734, will not start with the key.I have found that if the battery spins the starter, but no start, and pull start works fine it is time to rebuild the carb with a new...
-
RRivets replied to the thread Toro GTS self propelled personal pace mower drive not working.This manual will probably help you solve the problem. https://www.toro.com/getpub/22446
-
ROn this Memorial Day I would like to say a big THANK YOU to all who served this country to make it safe for the rest of us to live in...
-
RRivets replied to the thread Walking speed of Toro mower is too fast.Time to replace the drive belt and readjust the drive cable.
-
RRivets replied to the thread Jump starting an under-seat battery?.Ever think about setting the parking brake, which bypasses the seat safety switch?
-
RRivets replied to the thread Troy Bilt Help.If you would look at this site, you will see that using the model number you supplied, it is a 2010 model, not 2003...
-
RRivets replied to the thread Adjusting RPM'S.Post all engine and mower model and serial numbers. We can then tell you how to adjust the governor.
-
RRivets replied to the thread Troy Bilt Help.Hollydolly, I’ll bet that your brain size is smaller than your shoe size, plus you were born after 1990. You came here asking for help...
-
RRivets replied to the thread Carb Still Leaking After Parts Replacement.In my opinion that seat is toast and should be replaced.
-
RRivets replied to the thread replaceing drive belt on toro 22 personal pace mod 20333 which has two belts.I’m sorry but trying to explain the different parts of doing this job is not something I can do anymore. I’m also well north of 70 and...
-
RRivets replied to the thread No spark on B&S push mower?.When you remove the starter shou as IL suggests, you will be able to see if the brake bail is pulling the brake pad away from the...
-
RRivets reacted to ILENGINE's post in the thread Briggs and Stratton Carburetor Overhaul Kit 394698 with
Like.
that is the float valve seat. It is used in combination with the float needle on the right. Which may or may not be used with your... -
RRivets replied to the thread Craftsman 22" "mulcher" airbox?.The parts you need are just the air filter cover and air filter. Part numbers 245 & 250 on the diagram I posted. The only reason you...