Rivets's latest activity

I suspect that the linkages are not hooked up correctly. This manual should help you double check your assemblies...

Without the engine numbers I’m assuming you have a Briggs engine with the primer bulb mounted in the air filter base. Most times the...

Simple test before throwing time and money at this engine. Before opening the engine hook a VOLT meer across the battery and watch the...

Please post the model, type and code number from the engine. Also post the part number for the new coil you purchased. It would not be...

If used properly, I’ve found that leaf blowers definitely have a place in lawn maintenance, especially as you get older. Raking at my...

Hey Doc, do you realize that this thread is over a year old?

Oh boy you would need some very deep pockets. You are better off just buying a factory built electric mower if you wish to change from...

Boy you are smart Scrub.

Bingo. V-pulley and V-belt wear gauges

I tried!

I would agree with Star, bad battery. An internal shift solenoid needs a minimum of 11VDC to kick in and hold the bendix gear in place...

Yes the polarity is important. That why some old point systems [cast iron blocks] will not work when converted; until, the magnets are...

For setting the diaphragm needle on two cycle and some four cycle diaphragm carbs. New style on page 31 of this manual...

Type this into your search engine and I’ll bet you’ll find the answer to all your questions. how do briggs...

Thank you