Recent content by RitchieP

unplugged the key switch cable harness, blew out all of the dust, cleaned it up, and reconnected. it started up and I was able to mow without issue. Thanks for your patience and help Bert. I appreciate it.

Good advice - I will start at the key switch and work back to the trigger through the safety switches (PTO, Reverse, Brake, Seat) and then report back.

Hey there Bert. Tried to jump start with a new solenoid....starter engages and tries to crank. with key in on position, I am getting no power to the trigger on the solenoid. I believe that implies either a safety switch somewhere or bad connection from key switch to trigger.

Thanks bertsmobile I'll try that tomorrow after church. It's dark late thirty now, I'll report back tomorrow.

Cub cadet LT1045 2008 Worked great then won’t start. Mowed lawn (3Acres) Dusty but not high grass No problems. Then pulled a small trailer with some landscaping stones, worked great. Parked it, went in, had dinner, came out 2 hours later and it won’t start. 12.2V from battery Fuse is good...