RevB's latest activity

And a third called JIS, Japanese Industrial Standard, screws and drivers.

And, consequently, you need a set of JIS screwdrivers......

If the carb is a Nikki or Mukuni carb they are NOT Phillips head screws they are JIS screws. Indicated by a little dot next to the X shape.

The acetone [100%] mix with Dextron Trans fluid at 50/50 as so far worked best for me. I going to be trying this mix with zerk grease...

Which all points to ****ty engineering design of the rocker arm/valve stem. Or they just went with an off the shelf valve. There is no...

Just how can they rotate the valve when even pressure is applied. To me they would more like wear prevention caps to prevent the valve...

I'm sure that 1000ms ramp time will make all the difference in the world to your clutch. 🙄

Starter and/or battery aren't "good".

re the carb.....you don't "see", you blow out passages with compressed air.

Why mow sticks?

Full throttle...... They do make electronic soft start units that will ramp up the engagement voltage over a second or two. Also senses...

Grab the spark plug lead and try to start it....

Ethanol didn't do that.

His starter isn't engaging the flywheel