RevB's latest activity

Automotive repair or engine rebuilder....most straight machinists don't.

These are mower engines not the space shuttle.

Whatever.

Not the whole industry....just the gullible part of the industry. Let's take Permatex 80037 as an example. This material is your silicon...

But then you still have the seat...🤔. Agreed that not many have the stones or the tools to grind seats and/or valves....or the skill...

Lapping does not increase compression. Will not remove pits, not used for removing carbon, and has zero effect on performance. There...

Precisely the behavior of my engine. Thought at first it was fuel pump related but no....ignition. Pulling cylinder 1 plug cap resulted...

As it so happens I just had to replace both coils at 480 hours. Yes they do fail and it not ucommon for them to fail . The post below...

I would pay to watch him do that....🤔

You ought to watch some YouTube videos of Pakistanis rebuilding engines.

You can replace a camshaft in a used engine for less than half of what a new engine costs. Tariffs have been overhyped and used as...

The fuse kits from Amazon and others are crap. There are tests of fuses rated at a specific amperage that continue to operate at 400%...

Just replaced both of mine at 480 hours on the originals. The result was dramatic.

That engine probably it is mounted on a JD mower. Kawasaki USA is barred from allowing you look it up. Now here's a twist it uses two...

Yes...there are two transistors in each coil and they can and do fail. Every revolution of the engine creates a spark. At 3300RPM that's...