Recent content by Rabcomm

Ok thank you, I noticed that when I set the flywheel down without the key it sets flat but when I install the key it will rock no matter where I position it. (store bought) So I ordered some OEM keys and will try them. Thanks for your help.

Thank you for your support. I found the problem, I found the crankshaft key sheared with half staying in the crank and the other half in the flywheel. Never say one shear like that before. Did a little damage to both components but not enough to take it out. I picked up a standard key, cut it to...

Thank you for getting back to me so soon, what I have is a Model #42E707. Type#2631 E3 and Code#0003065A. This tractor was working fine until I parked it then it would not start. Found no spark so I replaced the coil and it started so I cut the lawn. It stalled after about 1/2 hour then I...

I have a 19.5 hp mower that stopped running, no spark. I changed the coil and it ran long enough to mow the lawn then stopped again. Now it tries to start but won't like it has a retarded timing, it won't quite hit. Pulled carb apart and diaphragm is good, valves are not stuck. Pulled mag to...