Recent content by rabbit.57

All right follow up pushrods aren’t bent for the valves compression will actually pump up to 150 psi Plug Foul the Carbon up pretty good within 30 minutes. I think the hourmeter is wrong because it only shows three digits It’s digital I pulled one head because he thought maybe the gaskets were...

That was one of the first things I did because I thought it was a blown head gasket thank you

that was one of the things I had planned on checking I guess I’ll leave that up to the first thing I do when I get back over there thank you.

Actually the Kohler motor manual that came with the mower calls for 90 pounds of compression and they’re both close to each other but not right on the same number. Thank you

Starts fine runs up to RPMs that it should be you start mowing 2 inch tall grass and it just loses all RPMs down to about 1600. Compression is 90 pounds and it seems to be failing the plug to has a new fuel filter on it air filters are coming in but it didn’t make any difference if you took them...

My guess is that you need to adjust your valves the compression release that’s on the exhaust valve is probably not engaging and it won’t let it crank over all the way easy fix

Cup cadet M 60 tank 27 horse Kohler won’t start it won’t crank with the key 2002 M60 tank mod#53bb5bdx750 Kohler 27 horse #27 24113123. Won’t crank with the key has a new ignition switch new starter . It started after we put the new starter and key switch and ran fine. Button everything back...