Norm74's latest activity

Hi Star Tech. Sorry to hear you were in the hospital, and hope you are on the mend. I too regret my snap. My apologies.

Looks simply like the bolt fell out, and since (as others note), the blade assembly acts as a flywheel, it may be a cause of the...

On your flywheel nut, it helps a hundred times over if you have an impact gun. I never needed a super heavy duty one so years back I...

Lemme tell ya a little story about a man named Jed.. Ya get that .. or you don't.. doesn't matter either way. The "D" series all share...

Looks like an older Land Pride Rotary Cutter. Model number would depend on size. That’s the best guess coming from my crystal ball.

This is pretty interesting. Maybe it'll save some folks some money.

@PTmowerMech , thanks for sharing / posting this up! Always interesting to see some reactions when members attempt to share helpful...

Right hand threads on most Craftsmen units. I suggest you block the blade and pull out your 1/2” breaker bar. Using a good penetrating...

Do you use starting fluid?This will blow a head gasket if used to much.It can also STRETCH the head bolts,and the bolts will bottom out...

Don't maybe my was just works for me. It sorta the competitor shop owner was complaining about how it was to install fuel lines. Then...

The play in the piston (slight back and forth when pushing it with fingers), is most likely worn connecting rod bearings. We are talking...

Normally that can be the cause but not for a no crank issue. That would be related to cranking but not starting up issue. In this case...

Hope you get better soon

Take care of yourself man.