Neo7's latest activity

Ok Guys, I was not keen on sanding that flat surface so a trip to the machine shop is how I fixed up my plastic manifold … I then...

That's all good but these are just lawnmower engines and many people working on them don't have such tools (yes I do). The problem is...

I'm kinda surprised that no one here has tried to sandpaper the plastic manifold flat? ... I'm just trying to find out if that actually...

Sorry, I'm not sure if I recalled this correctly, as this guy says the larger jet is on the "R" side. Anyway, I know they're correct on...

I'm working on a B&S 25HP, Nikki at the moment. So with a lots of magnification I read 111 and 114 ... 111 on the "R" Side (Cylinder 1)...

Most of this makes sense and has already been covered above. But there is no way an engine that's had a blown head gasket and has been...

Visually yes, bet it looked like a new baby calf. Thermally, no. All it did was mummy wrap the cooling fins killing cooling...

No. It will insulate the fins causing poor cooling and over heating. Not a good idea.

I've used light coats of aluminum paint with great results.

So what's your thoughts on spraying the cylinder heads fins and rocker cover cans with black engine enamel?... Would that help with heat...

Oh Ok thank. ... so I'm kinda wasting my time then :-(

Hi all, I'm currently rebuilding a 25HP V-Twin and before I put it all back together I want the case and cylinder cooling fins to be...