MParr's latest activity

She got it figured out and that's what counts.

Heck, they are ramping up to E-15 now. The save the world tree huggers are patiently ramping up the program to do away with (starving...

https://www.pure-gas.org/

Hello H., If they did not engineer components to fail, we would not have much work at all. Of course, on the other side of the...

Let's back up and punt. Pull the fuel line off at the carburetor. Is fuel flowing from the fuel line when you crank it? If so, the fuel...

Re-seal the engine. Keep the hydro oil and filters change at the correct hours and using the correct fluid. Send it!

I have a 2003 Exmark Lazer Z with the 23 Kohler. Separate pumps and wheel motors and they have whined since new and continue to work...

I own a commercial Gravely and have experimented with several blade brands and styles. My recommendations are based on experience. The...

Thanks

If you want good discharge, the #3404 are best. This will be the blade to use during the growing season. When you want to chop up...

Here's a blade that will give you a good cut. You will need 1/4" blade spacers between the blades and spindles. Rotary #3404. Now for a...

The Gator G6 are 3" wide and 1/4" thick. So, they are heavier than the OEM blades. Your engine may not have enough horsepower to handle...

Have a ZTHD 52” took the stock blades off at 25 hrs, put on some Oregon 396-806 g6 gator, cut well but don’t seem to discharge the...

Thank you.

Blades are 18" L x 2.5" W with a 5/8" center hole. Ferris # 5101756S Rotary # 3404 There are other options however, you should be able...