MParr's latest activity

Have you had the chance to try the blades that I posted above?

The mower will normally do that when turning. You didn't say if when turning or otherwise. But one factor will greatly influence that...

I agree , balance is important and I use my pocket knife and know where center is . You say , how in hell does that ole man know where...

Yes. I'll look into those. Thanks.

🤣🤣🤣

@BigBlueEdge Did you see my above reply about the blades that might fit your 72" Bad Boy?

They do a FAIR job on dry grass and leaves. However, high lift or OEM blades do a much better job. Remember, mower companies designed...

I had a set of G6 on my Gravely Pro Turn 260 this morning. I took them off shortly after I started mowing. Grass soup was falling out...

@StarTech Rotary lists the #6026 as a fit. Maybe a local dealer would let @BigBlueEdge try a set for fit. If they fit without striking...

One more thing, Gator blades make for a horrible cut. If your grass is just a little damp, they will pack the deck with clippings. This...

The tire pressures must be set before making leveling adjustments to the deck.

https://www.oregonproducts.com/en/mower-blade%2c-24-3-16%22/p/99-429

24.218" from blade tips to blade tips. https://shop.badboymowers.com/products/part-038-1030-00-6-pack-of-72-high-lift-fusion-fusion-blades

Well that would leave no overlap; unless, BB is lying about the cut width as 3 x 24" is exactly 72". I have yet to see a mower with no...

Each tank has an individual gauge. I often mow till one tank is out of fuel. It doesn't hurt anything. Besides, most of those fuel...