MParr's latest activity

Unless the grass is wet.

I am not a big fan fan of John Deere. Overpriced, overrated, parts are higher for OEM, and often more difficult to work on. Kawasaki is...

Time to punt! You need to get the deck out from under the tractor and evaluate the problem. There may be a problem with the deck. Are...

You were typing at same time as me in your post 20 For one: (in the video) as to what Rivets noticed also the belt is riding too high...

Added 2 ounces of Sea Foam per gallon of gas and ran it at about 1/3 throttle for close to 2 hours with a fan on it then got on it and...

WIX WL-10102/Napa Gold 400102/HG 52114

Cut you a piece of tight fitting fuel line and put over each end of the shaft.

Parts Tree

Now we get an idea of what type of mower you have. Is this what you are talking about? https://www.partstree.com/parts/troy-bilt-731-07203/

I don't know anyone who uses the things. Many people remove them or rig them to stay pulled out of the way.

You may want to remove the fuel tank and clean it out. It's better to get everything cleaned out than throw more parts at it.

I just had a device that had been stored act that way. Blew out the lines and all was good. No idea what got into a sealed system but it...

I'm leaning towards trash in the tank and deteriorating fuel lines.

I believe the fuel tank pickup line is going to be the issue. They collect debris over time and it is very subtle for it to gradually...