MParr's latest activity
-
MMParr reacted to Scrubcadet10's post in the thread Customer states, hit a stump and now deck is making terrible noises with
Like.
"I just need this sharpened" -
MMParr reacted to Auto Doc's's post in the thread Customer states, hit a stump and now deck is making terrible noises with Like.
I have a bad scar in my shin caused by a push mower blade fragmenting like one of these shown. People don't realize that checking and...
-
MMParr replied to the thread Ariens Zero Turn Ikon XD 52 - dead!.Check the wiring diagrams. You will need the model number and serial number to find them.
-
MMParr replied to the thread Ariens Zero Turn Ikon XD 52 - dead!.Dead battery. PTO switch is on. Faulty safety switch. Blown fuse. Bad ground.
-
MMParr reacted to StarTech's post in the thread How to Remove HYDRO GEAR 72972 TRANSMISSION FAN PULLEY with Like.
Why? The shaft adapter has a double flat ground on it. The problem is it is a odd size tool wise. It is 29/32" open end wrench size...
-
MMParr reacted to Auto Doc's's post in the thread How to Remove HYDRO GEAR 72972 TRANSMISSION FAN PULLEY with Like.
An 18V 1/2-inch drive Ryobi impact with correct socket will know the nut off quickly. Then it is a matter of getting the pulley off if...
-
MMParr reacted to scottchopchop's post in the thread How to Remove HYDRO GEAR 72972 TRANSMISSION FAN PULLEY with Like.
Got it off. Pics attached. This one is drivers side (LH when sitting and mowing) Didn't have to remove the wheel. Working...
-
MMParr replied to the thread How to Remove HYDRO GEAR 72972 TRANSMISSION FAN PULLEY.Impact wrench or a socket and ratchet top side and an open end wrench underneath.
-
MMParr replied to the thread yamaha 824 engine in bad boy rogue.Bad Boy, just like some other manufacturers, got fooled by Yamaha's marketing game and reputation. These engines were not what they...
-
MMaybe this service manual will help you out. https://www.toro.com/getpub/182206
-
MMParr replied to the thread Timecutter Dead.The brake control modules are a common problem on these mowers. The safety switches are also problematic. There are switches near the...
-
MMParr reacted to Auto Doc's's post in the thread Toro Timecutter 4250 - love it! Hate it! A modest proposal with Like.
To run parallel on a hill you need a 50 lb. wheel counterweight on one side (uphill side) as a minimum to maintain traction. Loop around...
-
MHello MParr, Glad you got it running.
-
MMParr replied to the thread A Nikki Carburetor Fails Me Again.New carburetor is on. Choke and throttle cables adjusted. It's running great.
-
MWell it does to be put out my misery. If it was here I would pull a Colonel Potter and just pull out by side arm and shoot it. And might...