MParr's latest activity

Going to try to post. LMT-77 I would assume it is the 697592 nozzle as LMT is not list otherwise. Walbro says the Carb is Briggs PN...

It depends on the manufacturer of the drive unit. Find out what you have on your Scag.

from what I have read you can use 20w 50 motor oil for the hydros has anyone else done this ?

Read the Gunk product label. Be sure it's safe to use on plastic and rubber. Non-chlorinated brake cleaner works well. Hose off with water.

Want to let MParr in on update. Now I know why there is a Winter. I've been cleaning off 14 yrs of grime and found plague on the metal...

New member here, just started repairing a saltwater damaged Gravely 150 PRO (988059). Rebuilt the 14HP Kawasaki, runs great. New...

What is the problem with the blade? Or, is it the mower?

The G3 is not going to perform better than the Toro blade.

4.5" angle grinder with a 40 grit flapper wheel. You will get the hang of it. A nail in a tree or a cheap cone balancer is all you need...

I think the answer is that it wasn't maintained properly 😂

You are getting closer to the answer.

That would apply to the The worm drive clamps are on Kawasaki FR series engines. Kohler uses a different design.

One more thing. Yamaha is or has divested itself from the power and small engines. EPP of Japan is to get that segment. It will be very...

LESSON LEARNED.....DON'T ASSUME. I have owned several Broadmoors over the years, beginning with a 728 that I bought new and still own...

I use grease on the intake horn were the filter attaches. The fines will not get past the grease.