mmoffitt's latest activity
-
Mmmoffitt replied to the thread Switching to longer blades?.thank you hope things have gotten better!
-
MThey worked with me for quite a while on adjustments (belt tension, deck leveling) and got me the adjustable casters. It improved things...
-
Mmmoffitt replied to the thread Switching to longer blades?.my 1.5 cents good day Sir what does the manufacturer tell you (tech rep/engineering) Good luck
-
Mmmoffitt replied to the thread 19.5hp oppy starter gear.I'm at a loss for words...cut right to the chase give as much information as one can on "said" piece of equipment.. Most of these guys...
-
Mmmoffitt reacted to Auto Doc's's post in the thread i am working on a Ferris 5900536 model number. unit will not start, i mean nothing. no power. all safety switch's replaced. Ignition switch replaced, with
Like.
Some people live to work, some people work to live, while there are still many more who just watch from the outside and wonder why work... -
Mmmoffitt reacted to Rivets's post in the thread Standard belt for 42" Deck Ariens Mower too long? with Like.
I’ve seen it many times that a belt which is the wrong size, too long or short, wrong angle, cause problems which I would not expect...
-
Mmmoffitt replied to the thread i am working on a Ferris 5900536 model number. unit will not start, i mean nothing. no power. all safety switch's replaced. Ignition switch replaced,.Don't want to be a trouble maker ....but of course not...BASICS!!! why spend money on parts you DO NOT NEED! Thanks for your always, ok...
-
Mmmoffitt reacted to Rivets's post in the thread i am working on a Ferris 5900536 model number. unit will not start, i mean nothing. no power. all safety switch's replaced. Ignition switch replaced, with Like.
Did you ever go through the procedure I posted to pinpoint a cause?
-
Mmmoffitt reacted to Tiger Small Engine's post in the thread Won't Spin Past Compression Stroke with Like.
Step 1). Load test battery and clean and tighten all connections. Step 2). Check valve clearance and adjust as needed. Step 3). Listen...
-
MBearings come in standard sizes. Buy a set of quality bearings and don't over tighten.
-
Mmmoffitt replied to the thread CUB CADET 1000.ALL COVERS in PLACE as per manufacturer/assy specifications...they are on there for a reason! Goodluck with your project
-
MMost likely the battery or a corroded cable connection from sitting. A multimeter will only measure the voltage potential, not the...
-
Mmmoffitt reacted to Auto Doc's's post in the thread Wheels out of alignment, would new spindles help? with Like.
These tie rods have a couple of odd bends in them already. It would take a torch to heat the steering rod red hot, then a long prybar...
-
Mmmoffitt replied to the thread Wheels out of alignment, would new spindles help?.Some heat!
-
Mmmoffitt replied to the thread Wheels out of alignment, would new spindles help?.the tech Steve E. at Wonder mowers would agree too!