LMPPLUS's latest activity

What's the engine model? Check and see if you are getting 12v to the control wire at the base of the solenoid, if you are check for 12v...

The B&S engine you have uses an OEM head gasket P/N-273280S or after market equal to it Rotary P/N-11071 or Stens P/N-465-043. We have...

I think you you have a head gasket starting to blow thru.

When it shuts off the first thing I would do is check for spark on the ignition coils and second see if the fuel solenoid piston is...

My thoughts go a weak ignition coil or fuel solenoid, i'd suggest when it shuts off check the plug wire for spark and see if the fuel...

As several have said there appears to be some misalignment causing a lot of pressure on the belt or something is rubbing the belt.

A simple oil drain tool is a large syringe with a piece of tubing on it, not fancy but works.

Ideally it is best to go with OE when possible. Many large lumber/hardware suppliers carry genuine filters if they also sell the mowers...

What are the moisture conditions when you mow? If the grass or ground has much moisture in it this also will contribute to plugging, and...

Compatible and correct are not the same. If you are using a bagger, you need hi-lift blades.

Mulching and high lift blades are opposites, other than they both cut grass. High lift blades are designed to cut and evacuate the grass...

As someone has said if your parts we're internet purchase only a few have any quality control, be suspect of them all.

That's what comes typically comes with enternet aftermarket carbs, another problem. Buy one from someone who has some quality control.