LawnWizard's latest activity

Just a couple of thoughts. 1) as stated above, mow at full throttle. 2) don't cut while turning, do three point turns. 3) check deck for...

It does have a vent that is attached to the ROPS bar. I can't recall ever have a bad carb that worked perfectly for 10 minutes at a time...

If this model has a fuel vapor check valve (usually hidden) in the top of the fuel tank, that is a likely suspect. Like Scrubcadet10...

leave the fuel cap loose and see what happens

Working on a Kubota ZTR with a Kohler CV682 3024. Engine starts right up and runs good for about 5-10 minutes. Then will shudder and...

My guess is that he won't work on them because after market parts are not readily available. That means he has to go to a dealer, buy...

I checked for continuity of the light brown wire from the brake switch to the seat switch. It was good. If I defeat the brake switch...

Unfortunately the seat switch did not fix it. I tried a new switch, even tried a new brake switch, even tho I bench tested ok. I'm stumped.

I looked at the wiring schematic about a hundred times trying to see what else was in that series. I just could not see that that switch...

Thank you.

Thanks, but you're not understanding what I am saying. I read pg 15. If the operator is not present the seat switch should kill the...

Let me rephrase that. Shouldn't a bad seat switch kill the engine as soon as the PTO is engaged b/c it thinks the seat is empty?

I understand. But shouldn't a bad seat switch also kill the engine when the electric PTO is engaged if the seat is empty?

Good day all! I am currently working on a Husqvarna YTH24V48 with Briggs Intek 724cc 24.0 hp. Question is about the park brake switch...