Recent content by Kradebaugh73

  1. Kradebaugh73

    John deere gx75, scratching my head.

    I understand that. Revb had said to check the actual plug wire. Out of curiosity, what is that piece of equipment called?
  2. Kradebaugh73

    John deere gx75, scratching my head.

    The coil ohms at 18.6k from the plug boot to the body of the coil. Is there another way to test it?
  3. Kradebaugh73

    John deere gx75, scratching my head.

    while the engine is cool, the coil ohms at
  4. Kradebaugh73

    John deere gx75, scratching my head.

    But if anyone can point me to a Chinese coil that would work, I would be greatful!
  5. Kradebaugh73

    John deere gx75, scratching my head.

    Well turns out it's a weak spark. I let the mower cool off and tested the spark again. So it is indeed a bad coil. I appreciate all of you guys!
  6. Kradebaugh73

    John deere gx75, scratching my head.

    And I have fuel. As soon as I wouldn't start back up, I opened the drain on the bowl, and it was full of fuel.
  7. Kradebaugh73

    John deere gx75, scratching my head.

    Well, I tested for spark, and I have spark. Engine gets hot and it dies. Will not start back up. Not sure if it is a strong or weak spark, but seems sufficient.
  8. Kradebaugh73

    John deere gx75, scratching my head.

    I completely understand. I usually break it down for people, OEM is $$$$ China is $. I typically leave it up to the customer. But I am still pretty green with all of this. Better than average, but still green. In my opinion anyway. I appreciate the help!
  9. Kradebaugh73

    John deere gx75, scratching my head.

    So with your experience, and that ignition coil that comes from deere requires you to buy the sparkplug boot separately, the Chinese one, if you were to buy it, would you buy one that the boot is already installed, or would you continue with the two piece?
  10. Kradebaugh73

    John deere gx75, scratching my head.

    Oh okay. I don't have alot of experience with John deere besides ordering some oddball gaskets. I've found some Chinese ones that say they are that part number, but I don't know if I should trust them.
  11. Kradebaugh73

    John deere gx75, scratching my head.

    But how would JD have it, If Kawasaki doesn't make them anymore
  12. Kradebaugh73

    John deere gx75, scratching my head.

    I am planning on testing it tomorrow after I get off work. But for giggles I tried to find a replacement ignition coil, to find an idea on what it's going to cost. Apparently I can get one from John Deere, But it is expensive lol
  13. Kradebaugh73

    John deere gx75, scratching my head.

    Would you just pull the plug , ground to the block, and turn over the engine? My only experience so far with testing coils is with the ohm meter.
  14. Kradebaugh73

    John deere gx75, scratching my head.

    It is a kawasaki code fc290v-gs10 Engine number fc290va13653
  15. Kradebaugh73

    John deere gx75, scratching my head.

    I am sorry to hear about the loss of your psychic powers! I will update my post this evening with the engine numbers!
Top