Recent content by kingofammo

  1. K

    **SOLVED ** ...Rider YTH21K46 won't start, won't shut down, even with new switch and new solenoid..READ

    THANK YOU TO ALL WHO REPLIED TO HELP WITH THIS PROBLEM... dan the KINGOFAMMO
  2. K

    **SOLVED ** ...Rider YTH21K46 won't start, won't shut down, even with new switch and new solenoid..READ

    Problem SOLVED..this should be a Sticky on how to persistently follow the symptomatic clues to solve an obscure problem when all parts check good, and your readings, specs and schematics don't help.... SOLUTION : follow and investigate the observations that don't make sense , in my case : 1)...
  3. K

    **SOLVED ** ...Rider YTH21K46 won't start, won't shut down, even with new switch and new solenoid..READ

    Any guess which one or two of my switch harness F56's it might be bad given my symptoms ? If there broken where can I get a replacement, and could I rig another type of clip in ? THANKS very much for your help !!
  4. K

    **SOLVED ** ...Rider YTH21K46 won't start, won't shut down, even with new switch and new solenoid..READ

    SIr where are the F56 terminals and what do they look like please ?
  5. K

    **SOLVED ** ...Rider YTH21K46 won't start, won't shut down, even with new switch and new solenoid..READ

    UPDATES & TESTS CHECKS...switch is original Husqv, though same make/break as StarTech shows, see my actual schematic attached... TESTED switch with G to negative and touched all contacts with battery positive, results: were all open circuits on Run, ROS and Start switch positions , but M and A1...
  6. K

    **SOLVED ** ...Rider YTH21K46 won't start, won't shut down, even with new switch and new solenoid..READ

    Fine for 12 years then one day it would not shut down, and then wouldn't key start ..installed new switch and new solenoid but no change.. SYMPTOMS and CHECKS ...> meter doesn't light, jump starts on Run or ROS, then runs with switch in any position, ROS position works, will shut down only with...
See more
Back
Top