JimP2014's latest activity

Here are 2 images, one from Repair Clinic and one from Sears parts for Model # 917289070 Official Craftsman tractor. The images...

It sounds good when you're sitting on the machine you engage the blade s + here's what's actually going on I don't know what to say it...

Doofy, Your skills with welding are something that I've always wanted to learn and I've looked briefly at some sort of rig that's like...

Who you talking about Barney Fife? I'll pass.

I usually cross the OEM belt number to the brands I'm looking at and have had fairly consistent good luck. I don't buy the cheapest...

Okay I appreciate your answer and I understand your frustration Right now I'm just trying to get the thing to run and it's definitely...

Johner, I found the belt and so I cut it and so I used duct tape to tape it basically to a kitchen countertop area and it turns out...

Johner, Thanks for the reply I don't know if I still have the old belt because the one that is partially shredded I'm still using and I...

See I don't have those skills so you know not much I can do there but I believe you.

Rivets you have no idea the things I've found so with the other small idler pulley and with the mower deck completely separated from the...

For me I see no other solution I don't have the skills to somehow braise some sort of shim to get the angle back. And the truth is this...

So if the pulley doesn't track the way it should this is how I solve the problem with duct tape I put multiple layers directly onto the...

Okay here's my final idea I'm going to take duct tape maybe one strip maybe two strips I don't know + attach it to the underneath side...

I'm not sure what I'm actually uploading but what I did was I took a piece of cardboard and I put it on one side and it goes underneath...

Hi Gord, thanks for your reply I am working on that. I did find you can't actually tighten down the small idler pulley ARM to much...