Recent content by jeffro79

A keyed shaft and pulley probably would be better (and no oil leak)

I removed the pulley and found the splines were worn down, so it wasn’t turning the spindle. The nut must have worked loose and oil residue probably factored in.

Also, right control lever moves back and forth with more resistance than left side.

Btw, it has high hours. Both sides seem to have a slight whine, but have ran fine since purchased used a year ago.

Howdy all. I have hydro grear 3400 issue. Ongoing leak from cracked reservoir. Right side acted funny at start of mow but then normal for awhile till it lost power. I cleaned oil residue best i could, and belt tension doesn’t seem to be a problem. Left side pulley spins fine but ride side is...