JBtoro's latest activity

Yeah, I'm thinking that the arch is there to make it easier to get the 2nd clip installed. The 1st clip is easier to install because you...

The retaining clips on the kit I got are identical; both have tangs. Which side gets the arch, the left clutch/shaft side (red dot) or...

Am rebuilding a 128LD. Received the OEM kit from seller and noticed that the piston has different openings where the piston pin affixes...

Yeah, I agree that you are likely ok. Honda ... well ... does things different. The capacity of the engine is 18-20 oz. but when one...

Anyone know what the NOT is for a GCV160 or GCV190? All the manuals I have found simply refer to NOT but none give an actual temp in...

Glad it got solved. If it comes back, I kinda suspect the coil. Sometimes the heat from the engine exposes weakness in the coil which...

Thanks for the clarification. Honda has so many model #'s ... it gets confusing. Anyway, I went to the link you provided & it shows both...

Mine is the HMA model, not the K2.

Picked up a used HRX217 HMA a few years ago & have enjoyably mowed with it for 3 seasons. Recently I saw an HRX video at...

I suppose one could insert a zerk. As I originally posted , I am dealing with a 10 year old JD, long after JD exited the walk behind...

Yeah, I think the risk is greater than the reward but just thought I'd ask.

I have a John Deere walk behind, JS46 (2010-2011). The tranny (rear wheel) is fine now but since this mower is no longer being made...

If you are confident that you have thoroughly cleaned it, you have 2 options: 1) buy a new carb on Amazon for as low as $10 from time to...

I might suggest watching these two videos. I followed this fellow's recommendations this summer on an HMA with good success. The speed...

Okay. Good discussion; that's what I was hoping for.