ILENGINE's latest activity

One of the models of your mower I looked up indicated that the MIL light may be on the left side of the seat near the parking brake...

Closest I have seen were propane.

match what was there originally, making sure the holes and cutouts align. I spent two days once trying to get an Opel GT running right...

Yes. The 754 and 954 are jus variations of the same item with different packaging.

Nothing goes in the hole where the bottom of the link is currently at. That hole is used for a different application. And the spring...

The throttle link is supposed to be connect to this which is connected to a round rod protruding from the side of the engine using the...

You do not want the 2 to make contact otherwise you are torquing the D adaptor to the crankshaft not the clutch to the crankshaft...

Some of those units were setup as a fixed speed engine and had a rod and a nut to adjust the speed up or down for the application.

Looks to me exactly like a 1988 MTD 11/32. MTD made this series unit under a variety of different brand names. The Briggs engine...

The rod in the second picture doesn't connect to the sprocket. It connect to the governor arm on the side of the engine and then the...

Engine is from 93 which one would assume something around 93 or 94 but doesn't appear to be the original engine, since the hood and...

Sometimes a model of mower can be found by using the engine model information, but I can't read the numbers on the tag on the engine in...

The other spindle that they used on that model after May 27 was the 918-06991, which from the pictures looks longer that the 918-04822B

Your serial number put you before May 23,2014 so your correct spindle is the 918-04822B

I tell me customers that you can't afford to fix it, and can't afford to replace it.