ILENGINE's latest activity

See if this is relative to your issue https://www.manualslib.com/manual/2314540/Kohler-7000-Series.html

I suspect both issues are related. If the key is in the run position do you have battery voltage at the voltage regulator. If standard...

Seat Switch

The thread with the fuse issue was answered in 2019 and the wiring diagram for that issue was post 18. And the thread was brought back...

Item number 730D https://www.partstree.com/models/9p602-0023-f1-briggs-stratton-vertical-engine/blower-housing-rewind-starter-2/ This...

Emissions vacuum line that connects to the rollover valve on top of the fuel tank. If you don't have those items then ignore the barb.

An oily or lubed bolt requires less final torque than a dry bolt. That being said, that Briggs step #1 ILENGINE posted is news to me...

The issue is they are showing the starter for the use after 140601 but nothing for the before numbers. And the new series starte...

The service manual for the single cylinder Intek says to use valve guide lube on the head bolts

Yes you can always go heavier gauge. Mowers tend to be made on the very edge of acceptable wiring to make them function when new, but...

Husqvarna limits their dealers to 3 per year shipped directly from them. And MTD at one time supplied the adjustment tools to their...

Heck, even some of the OEM's won't sell their authorized dealers the tools to adjust them.

Ran into this exact issue last year on new Kubota seat. Replacement seat was slightly different than the original and design wouldn't...

I would assume they are referring to 0.8 mm which translates to 18 gauge.

Item 957 https://www.partstree.com/models/104m02-0010-f1-briggs-stratton-vertical-engine/exhaust-system-fuel-supply-7/ part number...