ILENGINE's latest activity
-
ILENGINE replied to the thread Craftsman 2019 T210 Clicking no Start.I had an issue with a name brand starter solenoid years ago. I purchased a box of 5 of this solenoid from my parts distributor. Every... -
ILENGINE reacted to Auto Doc's's post in the thread Customer states, hit a stump and now deck is making terrible noises with
Like.
If you really want to get a puzzled look on their face, ask them to bring in the missing parts so you can weld each of them back... -
ILENGINE replied to the thread Kawasaki FD750D-AS04 running poorly.This thing has already been through the 2.3 gallon 6 transducer ultrasonic cleaner for 2 30 minute cycles, plus had all the passages ran...
-
ILENGINE replied to the thread Kawasaki FD750D-AS04 running poorly.Spraying around intake manifold gaskets does nothing. Spraying into the carb causing a rich run. I have since discovered posting...
-
ILENGINE reacted to Auto Doc's's post in the thread Customer states, hit a stump and now deck is making terrible noises with Like.
I have a bad scar in my shin caused by a push mower blade fragmenting like one of these shown. People don't realize that checking and...
-
ILENGINE reacted to Scrubcadet10's post in the thread Customer states, hit a stump and now deck is making terrible noises with Like.
"I just need this sharpened"
-
ILENGINE replied to the thread Customer states, hit a stump and now deck is making terrible noises.No broken spindle housings. She said she hit a stump.. I don't think there was a stump involved. I think the worse of the 3 blades came...
-
ILENGINE reacted to StarTech's post in the thread Customer states, hit a stump and now deck is making terrible noises with Like.
I don't see anything wrong with them with my eyes closed.
-
ILENGINE posted the thread Customer states, hit a stump and now deck is making terrible noises in Mower & Equipment Operation.Received this mower last week after the customer said she hit a stump and deck started making loud noises and was vibrating. I think...
-
-
ILENGINE replied to the thread ZTX4 spindle disassembly.You cannot remove the bearings without damaging them. Only possible way would be to put the spindle in a press and then may sideload...
-
ILENGINE replied to the thread Older craftsman GT 5000 with 22HP B/S that’s back firing and won’t rev.up.It appears you have the Nikki carb which the jets inserted from the top of bolt in emulsion tube by both the tiny O ring that is on the...
-
ILENGINE replied to the thread Ariens Zero Turn Ikon XD 52 - dead!.I would start with checking the battery and/or charging it. If it didn't crank by jumping the starter solenoid I would be leaning...
-
ILENGINE reacted to hlw49's post in the thread intek 12.5 hp engine cylinder head gasket need to confirm part # with Like.
Bottom valve is intake top is exhaust. Clearance is .003 to .005 on intake and .005 to .007 exhaust.
-
ILENGINE replied to the thread Craftsman Deck Belt Routing.I think the steering rod to the front wheel is installed backwards. from the parts diagram needs flipped 180.
-
ILENGINE replied to the thread intek 12.5 hp engine cylinder head gasket need to confirm part #.I didn't include a part number for the OHV valve gasket set because in most cases the only thing you will use will be the head gasket...
