ILENGINE's latest activity

It is in the back of my mind. I don't remember any of the valves short stroking like the lobe is worn but I need to pull the valve...

I have and with no change. So I don't think leaking that much air around the shaft. Leakdown testing shows less than 15% bypass at...

Lets start with the model number of the mower. So we don't have to guess which of the 1000 different models of cub cadets mower you are...

The green wire is connector to the oil pressure switch. Could have 12 volts with the key on due to it being on the ground side of the...

I am going to say NO, but truely unknown. I am thinking in the back of my mind this a valve issue also, but without pulling the exhaust...

I have this engine on a Scag that is runnng poorly. New NGK BPR2ES plugs. Been through the carb. Adjusted valves to factory spec...

Depending on year of mower there is the possibility of a clogged fuel cap vent. Also there could be debris in the fuel tank that is...

Hear the click from the carb, And can also put your hand on the solenoid and feel it click.

Either way, I should still hear some sort of click from the carb area when I turn key to start/run position..correct? I will check that...

That wire I am thinking about may just be on the vertical engines. If you have the metal intake manifold it may not have the grounding...

First issue is finding out why there is no fuel coming from the tank. Possibly debris stuck in the pickup tube. And the solenoid is...

If you disconnect the fuel line between the carb and fuel pump and crank the engine does the fuel pump, pump fuel into a jar or other...

Haul it to the dealer and let it be their headache.

I would rather replace the belt on the 445 deck than replace the belt on the JD freedom deck.

If one of the push rods is down in the engine sump. the bottom of the engine will need to be removed to retrieve the push rod and/or...