ILENGINE's latest activity

So what is happening when I disconnect a kill wire from either coil, and both spark, but if you reconnect the kill wire to both coils...

Crosstalk diode in one module failing can potentially shut down both modules. Wouldn't be the first I have seen on Kawasaki engines...

Are both valve opening the same distance. I have seen one cam lobe wear down causing similar issues with rpm and running.

Shuts off all at once leads me to think the issue is not fuel related but more igntion related. Loosing spark when something gets hot.

The sprocket will be specific to the saw, but could have the option of a .325 or 3/8 pitch sprocket. Now bars can get more complicated...

When it shuts off does the engine sputter and run rough before dying or does it die like the key was turned off I am wondering if it...

Thanks a bunch. Once you explained what type of engine it is and where to look, I was able to locate a video where valve clearance is...

The model number the OP put in the original post is an L head engine.

You have what is called an L head or flat head. Have to remove the head to access the valves. and remove the small cover on the side...

I think there is more to this story that what has been told. If he is tapping out the filter. Is he getting enough dirt and dust into...

When was the last time the valve clearances were checked. Could of dropped a push rod on one cylinder which would cause lose of power.

I have some thoughts to what could be the issue, but without knowing what 19 hp Kawasaki engine I am only guessing. Having the...