Recent content by hogan36

Thank you!

Thank you!

Good Afternoon Everyone, When replacing/changing the negative and positive Battery Gauge Cables on your zero turn mower, does it make a difference what Gauge you go back with?

Thank you for your response. I went to AutoZone and replaced the hot post cable and the ground post cable. They both are good and tight on both ends. Anything else I should be concerned about? By the harness being burnt up, would a ground wire fasten to the frame anywhere? I have a place on the...

Greetings, I have a Snapper Pro Zero Turn Riding Mower (48 inch cutting deck) with a Kawasaki Engine and 19.0 HP. I let someone do my wire harness because the wrong ignition switch was hooked up to it which caused the wire harness to catch on fire. I put the wire harness on along with a brand...

Thank you!

Thank you! I guess I’ll give that a try.

I have no idea. I would like to send pictures to show you how bad they are messed up. I haven't took them off. Some of the wires are stuck together. This is not all of the wires in the photos.

I need it because the wrong ignition switch was hooked up to it and caused the wires to shorten out and catch on fire.

Thanks for responding. Everywhere I check tells me that they're on backorder and informs me they don't know when they'll be available. This has been going on for 1 year now.

Hello everyone, I have a Snapper Mid Mount Z-Rider Zero Turning Hydro Drive Series 3 Zero Turn Riding Mower with a 48 inch cutting deck and 19.0 HP Kawasaki Engine. I've been searching for the Wire Harness (Part Number 7074795YP) for this and hasn't had any luck on finding it. Does anyone...

I have a Husqvarna Kohler XT-6 lawn mower (149cc). It runs strong and it cracks up on the first pull. I can make one cut around the yard and then it all of a sudden cuts off. I checked the filter and fuel is coming into the carburetor. I cleaned the carburetor and changed the fuel. I just don't...