hlw49's latest activity

Yes it has hydraulic lifters

Years ago Kohler stated that straight 30W would develop air bubbles that would not support the lifters causing them to rattle.

797018 replaces 493362

https://www.peerlessgear.com/wp-content/uploads/2024/02/Peerless-booklet-for-website-FINAL.pdf

You cannot run straight 30W in the Kohler Command series engines if you do the lifters will rattle.

you are right

Well put. One big advantage a larger shop has if they have one or two experienced technicians with many years of experience is to...

I use the Kawasaki 10W-40 Oil in my CV20 Kohler. No problems. It looks like some of the engine manufactures are going to a higher multi...

This was a lightly used scrapped tractor with 179 hours on the clock I bought for $25. The front had been hit breaking the hood. It’s...

Some of live long lives and others very short lives. Some live long lives and others very short lives. Or some of us live long lives and...

I guess you get a kick out of putting other people down when you can. Go back and read your last post and find the flaw in it. Have a...

Trying to do it from memory sometimes my memory isn't as good as it use to be.

https://www.dixiechopper.com/owners-manuals/

Flat Idler pulley 3/8-inch mounting hole.

Got a used JD and am fixing it up to sell. Noticed the paint was coming off in some spots. Took a puddy knife and it peeled right off...