heavy_kevie's latest activity

Yes, it was misfiring as you can see from the rpm display. Typically it would idle 1500-1550 rpm but as the video shows it dropped to...

Get a HF hand pump. They're $7.49.

Just dropped of 10 gallon last week, and already have another 8 gallon collected.

Well for us with shops a good pneumatic oil extractor better and cleaner. Also we don't have fight stuck oil drains. A plus is with...

Also you can invest in an oil extractor which would suck the oil out of the engine. As a shop with many oil changes and the need to keep...

tilt it up on its side before you remove the drain plug.

And everything you just posted has been proven false. Some of it may of been considered true years ago, but with current fuel...

Like you Tony I am no expert on fuel standards or performance. I am with ILENGINI on this matter. I can not speak for USA fuels...

High octane fuels are harder to ignite BUT once ignited they burn slightly slower than lower octane rated fuels. In a 4 stroke engine...

VP racing small engine fuel is 94 octane https://vpracingfuels.com/product/4-cycle-small-engine-fuel/?c=232 Trufuel says theirs is...

All the saw mfgrs say to use 90+ rated fuel or it will damage the saw. I don't think so. I have serviced over a hundred customer saws...

The burn rate difference between 87 and 92 is negligible in stock small engines. We are not doing max HP pulls on a dyno. Has anyone...

I think I finally got it. Compressed the file further and converted to zip file. Temp while recording was 68F, 42% humidity, 29.89...

Okay, I've got the file compressed in the mp4 format to 3.3MB, but it says the file is too large. What do I do now?

Okay, got the o2 sensor plugged back in and the ecu reset, fired it up ran good for 6-7 minutes then started misfiring. Hooked up my...