Grasswhore's latest activity
-
GGrasswhore reacted to ILENGINE's post in the thread Troy Bilt B&S pressure washer throttle linkage with
Like.
Wait until you go looking for the model number on the Briggs XR engines where it is stamped into the mounting flange next to the oil... -
GGrasswhore reacted to Tool_Maker_Tim's post in the thread Troy Bilt B&S pressure washer throttle linkage with Like.
Good point ILENGINE. I can't tell you how many machines Ithat have looked up, trying to find the location of those numbers, only to...
-
GThere are some shrouds I will have to remove to check that out when I get a chance. Meanwhile, I found these numbers - MODEL 33R877 -...
-
GFirst check that you have the correct dipstick for your engine: With most vertical shaft B&S engines, you can check the dipstick for...
-
Gon that note, i have 3 craftsman riders i have converted to 'greasable spindles' . i change the bearings, remove the inner seals and...
-
GI just wish I could understand the mentally of equipment owners. They rather pay out extra money to the OEM instead buying from their...
-
GOne of the deck pulleys is getting hot and the bearing is seizing.
-
GLook what I found in the owners manual about the fuse rating....30 amps....that seems high to me for a manually clutched PTO. fyi, bartles
-
GStandard for most riding mowers for the main fuse to be 20 amp. Most riding mowers with electric pto have a 15 amp charging system...
-
GGrasswhore replied to the thread John Deere D140 with 22 hp v-twin briggs.I'm betting on one coil not working.
-
GGrasswhore reacted to ILENGINE's post in the thread John Deere D140 with 22 hp v-twin briggs with Like.
Lets start with disconnecting the deck belt from the electric pto clutch and then start the mower and engage the pto switch and see if...
-
GGrasswhore reacted to jsmith24's post in the thread Can I use paper gasket material for valve cover? with Like.
Thanks for the links. I didn't know the service interval so I was going by the "it probably won't hurt" theory. I also wasn't aware of...
-
GGrasswhore reacted to StarTech's post in the thread Can I use paper gasket material for valve cover? with Like.
From Service Bulletin 746. It is to note that on OHV engine the rocker clearance should be adjust to the minimum clearance to extend...
-
GGrasswhore reacted to oldntired55's post in the thread I played an unfortunate April Fool’s joke on my Briggs V-Twin. with Like.
dont be too hard on yourself... i am a 69 yr old retired mechaic, and ive done plenty of silly moves myself..."If i would have known id...
-
GGrasswhore reacted to Elkins45's post in the thread I played an unfortunate April Fool’s joke on my Briggs V-Twin. with Like.
It started right up and the ammeter indicates it's charging. I guess the Lord really does look out for fools.