Recent content by grantiman

Thanks for the info on that Hydro Gear 54730 hex plug, found one on Amazon, if I ever get the old one out I'll be sure to use the hex plug 👍

I'll remove the linkage rod and drive beat that's in my way so I have plenty room around the vent plug, also planning on making a heat shield that'll go over the trans-axle just in case any dry grass is hidden anywhere. I'll work gently with the heat and try moving the plug back and forth in...

I figured it wouldn't be an easy fix. I'll check on Youtube how to the remove the trasns-axle, hope I don't run into any problems there either. If I didn't have bad luck, I wouldn't have any luck at all, lol.. Thanks for all the advice, I'll keep you posted..

Changing my trans-axle fluid on my cub cadet z-force 17AF3AGV010, one side did remove a little hard but did loosen, other side I thought was starting to break loose but my 1/4" hex socket spun and damaged the inside of the vent cap hole, now my 1/4" is too loose. Has anyone taking these vent...

Changing my trans-axle fluid on my cub cadet z-force 17AF3AGV010, one side did remove a little hard but did loosen, other side I thought was starting to break loose but my 1/4" hex socket spun and damaged the inside of the vent cap hole, now my 1/4" is too loose. Has anyone taking these vent...