Recent content by Fragger

More than likely it is you cylinder because the control valve is telling the cylinder what to do it is jsut slow about doing it, here are some i found used on ebay. I had to redo the power steering cylinder on my Massey and it was not fun. Make sure you have plenty of kitty litter to absorb...

Heaveno , i been here a couple months now and really enjoy helping and being help as i dont know everything i need to keep my fleet running. I am the proud owner of a 125A 100 series John Deere , A Sear 54" lawn tractor an old hurrucane harvey victim Swisher believe i tto be T11044 also own a...

If this gets under somebodys saddle cause it is an old post you just gonna have to get over it , the information i have will save you alot of time and money $68 hr. I just removed the gas tk from my JD125A and only removed the two 10 mil spring bolts here's the secret, there is a bracket that...

I inherited a john Deere 125 A harvey series from the flood and it had been doing fine then it started having some fuel issues. So i watched some you tube to learn how to remove i t , i saw one guy hook the jd from the back remove the springs and jerk the tank out , he bent the frame to say...

I have check idler pulley alignments and belt tensioner still my Jd will throw the belt when i shut the blades :mad:off almost every 4 th time ....can it be my belt is stretched ?:confused2:

I own a M-Spector and it has saved me tons.Most cameras won't fit down a spark plug hole, but the Milwakee will.

I tried em first it got stuck to the left side then i bled the oil out on that side and it just seems real hard like the cylinder is in a bind i may have put it in backwards when i did the seal kit. another issue is i am having the brackets beefed up at machine shop so the cylinder is being...

yeah sorry bout that, what i meant was all that pertains to the cranking like hot lead , ground safety switches ect. , after some serious devotions and trouble shooting i found out it was my ignition switch, it was very corroded and appears like the ground wire is broke off at the...

I been working on my Massey Ferguson gc2300 i relaced the asseccory gear pump and been strating it but tody i ost all my power ,, my battery is hot but i have no panel lights and it will not crank , any ideas ...i have checked the obvious.. Thank you for looking

I willl look in my junk pile may have one .....

Anyone have a Swisher pull behind T-11044?? mine keeps slinging belts any help would be graetly preciated .:frown:

:newhere: I am glad you asked as people usually don't they just look funny at me , i go barefooted as i child my famiy was very poor and we were , many i would beg my daddy for some new shoes and then one day in Reyosa Tamps i met a man who had no feet and it really opened my eyes that i...