Forest#2's latest activity

I have never seen a snow blower of any kind here. But looking over the IPL I see it has an idle speed adjustment since it would after a...

the terminal goes to the ignition switch. The stator should not be drawing power unless the diode is shorted.

You say it seems the rpms are slow but: Try manually operating the governor rod and see if it picks up rpms good with no stalling or...

Right need to inspect before ordering parts. Might be whipping on a dead horse. I would look at availability of parts and prices BEFORE...

A rebuild is more than just throwing parts at it. Specs, allowable dimensions, wear limits, parts availability. Nice to know what is...

Set of rings and some gaskets would most likely stop the oil burning. Rings would be the costly item if they can be found. Set rings...

If you want an aftermarket carb buy HIPA. A couple of famous Youtube small engine shops have both recently stated they have used HIPA...

I added a snow king flywheel with teeth and an electric starter to make mine easier to start. Cost $100. I've done the same. Lot...

I just got through red koting some of those tanks. Really surprised at how well they cleaned up inside. I strapped them to a tractor...

I constantly tell people to "GOOGLE IT" google is your friend.

Here is a Tecumseh carb repair link. https://outdoorpowerinfo.com/repairs/ I've found clone carbs for the HM100 but they are the...

Hello T., The HM100 is a 10HP rated engine, but an 8HP would still do the job on a log splitter. These were heavy cast iron blocks and...

Super Tech and Rotella are available at the local wally world in my area for $18 gallon in 30W and they sell fast. I cannot make a trip...

Hello S., Synthetic is an improvement because it reduces both fluid friction and heat that are associated with conventional oils. As...

Your does not. If the pump diaphragm is on the side of the pulsa jet carb it does not have the check ball tube. The flappers on the...