Forest#2's latest activity

That is just a simple flat gasket with 3 holes for the screws. Easy made if damaged. I was like you at first, reluctant to go there...

Does IT have a green card? If not IT'S outta here fast.

Be sure you buy the real deal Briggs red. Costs more but worth it. I tried the clones, every one of them eventually started leaking at...

Quite often with the dual throat Nikki's I can get a good run leaving the carb mounted to the engine and remove enough stuff that I can...

My 407777 was doing the same symptoms, took the Nikki off and cleaned it, still acted up,, (lean backfire) I thought. Took the carb back...

Post up a link to your new post here also and we will get a heads up about such. Also maybe a video of the you are hearing. Back side...

You might get more responses if you start a new thread about your latest NEW issue instead of using the brake adjust rod playpost. If...

Have you had the deck off of the machine and thourghly/closely inspected the spindles bearings,idler pulleys, my doing a manual...

I do the same. A guy that swapped in new starters for customers gave me a big pile of starters sometime back and I've reconditioned...

I'm still one of the few in my area that will replace a simple broken plastic Bendix gear on a starter for a customer. Of course there...

Remember, it wasn’t that many years ago that starters, alternators, etc. were rebuilt locally. I mean, some still are but very few...

I'm thinking them little people with the little hands and fingers and Big Head did not have any trouble installing the brushes super...

Over the years, I have seen many intakes distorted from overtightening of the mount bolts. These bolts only require light torque and...

Allows small changes to the idle fuel mixture, but won't smooth out more major problems with running

Can you provide a coupe of pictures of you brush end cap parts? I feel like we are trying to instruct by brail here.