Recent content by Doobie#1

Wires got pinched between the bolt and nut.

Problem solved, thank you. When I was bolting the crossmember that latches the seat down and covers the drive assemblies, the wire got jammed up and grounded out. Once I pulled it out and taped it, voila!!!

The electrical trouble shooting guide states "Disconnect yellow safety wire* from engine and retest. Does spark now occur at spark plug?" I do not see a yellow wire on the left side and I do not know what they are talking about. Wish there was a picture of it. To any extent I am going to try to...

I have a Grasshopper 226V zero turn from around 2011 with 535 hours on it. It has a B&S 724cc, 26HP twin cylinder engine model 44P977-0110-G5. I recently removed the motor and replaced the seals and gaskets (was leaking from the sump). While I had the motor off, I cleaned the flywheel and...