Recent content by Digit

Thanks for the reply Rivets, I’ve seen the diags before but still confused. looking at the speed control diagram, I have all the components, speed control bar swivels on bolt 5 through bracket 15, bot 5 connects to bar 14. Bar 14 doesn’t move. Speed control bar has the plate on the end with a...

Hi all, I have a Lawnflite 603, model number 13DH473C611 (2007) and have lost all drive, mower stopped moving while cutting grass. The speed control knob is now flapping in the wind with no tension. I am sure there is a rod or spring missing from the plate that is attached to the control lever...

Bert, thanks for the info. Inlet valve was loose and the exhaust not much better. Both adjusted and now works nice and smooth. Thanks for you’re advice cheers

Thanks Bert, will check the valves the valves later if I get time. So what would cause the flywheel to stop after a 1/2 turn? Although it backfired before , at least the engine still cranked. cheers

Thanks for the reply Bert, sorry for the slow return, I’ve got 219807 0421 B1060 10ZA, Took a while to get the valve cover clean enough to read. What do you mean about the valve lash? I can do the very basics but my mechanical knowledge is not what it should be. Time for me to learn. cheers

Hi all, I have been lurking on this forum for a while and have now join in the hope someone can help with my issue. I have a ride-on mower with a B &S 12.5hp engine. Tried starting it a couple of weeks ago but it continually backfires. Decided to give it a new plug, air and fuel filter and had...