Recent content by DaveinWV

I'll let the dealer fix it. Thanks for your input.

Last Summer I was mowing at our church and one of my mower blades came loose and started vibrating. I noticed the bevel gearbox had oil on the outside of the case. Last Fall I cleaning the mower deck for Winter and checked the gearbox for a leak after sitting all Winter and there was no leak. I...

Our church has a LTX 1050 that's at least 10 years old. I was told the longer the mower is operated, each time getting the PTO to reengage is more and more difficult. I checked the mower after church. I sat in the seat, turned the ignition switch to run, and pulled the PTO switch out. The first...

Thanks for your suggestions for my friend's mower. It was the Charcoal filter. He cleaned it and the mower runs great. That saved him a lot of money and having to take it to the dealer. Thanks again, Dave

Thank you.

Kubota GR202 engine dies after running about 10 min. with or without the PTO engaged. Suggestions?

I called the dealer today and sure enough, the mower deck linkage relies on weight to lower it. The man I spoke to told me I was not the first to call about it.

Thank you for the reply. I looked at the control and knew there is no safety circuit. I had to use a crowbar to get pressure on the linkage until I could use my foot. The next time I won't raise the linkage all the way to the stop. Thanks again.

I bought a GR2020 two months ago. I pulled the mower deck to pressure wash the deck for Winter. I raised the hydraulic lift after disconnecting the linkage. When I went to remount the deck the linkage wouldn't lower. I had to use a crowbar to coax the cylinder to retract. I got the deck mounted...