Recent content by dana3132

OK - we're back in business. Still left scratching my head a bit but here's what happened. First, I tested resistance through the battery's ground cable to the chassis and got 0 resistance. I took the cable off entirely and tested it by itself - again, 0 resistance. It is bolted down just...

Disconnected the small wire from solenoid to ground and got 0 resistance. I did change out the starter solenoid just as a precaution (scrubbed everything down to ensure good ground too) but still not starting. It is making a louder clicking noise now when I turn the key and it will last for...

Just used a regular garden hose and kept the spray mostly "down" but definitely got more water in places than a normal wash would.

Hey Rivets, thanks for offering to help. Here's how far I've gotten, following your 6 recommended steps I've seen in other posts: Confirmed fuse is good and clean. Scrubbed and cleaned the connections at the battery (looked pretty good, but disconnected and scrubbed anyway). Voltage at...

Thanks! I just saw your post too and am looking into the No-Ox-Id too

Hey Mark, Thanks for taking the time to reply. The headlights don't turn on with the key but I think that it's just because the bulbs are old and non-functional. I put a test light on the connection point where the wire running along the chassis connects into the splitter that goes to each...

Hello. I have a no start issue with my Husqvarna YTH21K46. I've read tons of threads on this board but haven't come across this exact situation. Maybe my google-fu just isn't that strong. I have been following Rivets' EXCELLENT troubleshooting steps but am still hung up. I've confirmed the...