Recent content by cubcadet79

So I replaced the solenoid, brushed the terminals, applied some grease and it started right up. The hesitation in the turning over is still there. I will have that looked at now that it can start. The red wire does not get so hot anymore. Thanks again.

Thanks for all the advice. I'm rapidly out of my depth but will push on, as I can only imagine how backed up the local lawnmower shop is currently. So here is a recap of the starting issue, which seems to have likely caused the burnt solenoid. On cold start it would never fire up, no matter...

I have the battery cleaned. I got the di-electric grease as well. Thank you. Also, I have removed the solenoid that had a bolt melt out of it. I have a new one on order. I'm concerned about the fraying on the wire. Do I need to clip off the circle and get a new one?

Hello, Just getting the mower dusted off today. I ran into a problem. I have a picture below. So, I turned the key a few times and it lacked oomph. A little background: When I turn and hold the key it usually (for the last 3 years) fires, pauses like it gets stuck, then right that instant I...