Craftsman Garage's latest activity

This may be my unpopular opinion, but this is the 3rd Tuff Torq (2 K46, this K57) that I have rebuilt, and I find it pretty easy and...

I found the culprit. Jammed belt. I didn't see it until I removed the back wheel. Thanks

Thanks, Do you know which filter is better, the older paper or the newer mesh one?

Cavitation... You need at least a seal kit 1A646099151 or if center section and pump motor(s) are a repair kit. 1A646098420 When...

Hi guys, I have a Tuff Torq K57 from a Husqvarna YTH24K48 and was wondering what is involved to rebuild it? I just want it to be...

That is usually the way they sound before the rod breaks and ventilates the engine block. These Courage engines were a failure waiting...

A couple of pictures would be helpful. Lots of parts are no longer available for this engine through a couple of parts sources checked.

It's a Kohler Courage, junk it.

It's a grade of viscosity, thinner in winter as not to freeze.

Hello GMM, They quit making a repair connector with the diode on the red wire for this style stator a few years ago. I would not go...

1N5406, 600V, 3 AMP Briggs PN 391507 I have seen the 3 amp system work fine with a PTO on an Ariens Zoom 34 but upgrading by adding a...

The Kawasaki FH series engine puts it at about 20 years old, must be new old stock. Look on the silver sticker for date of manufacture...

Well, here is the update. I picked the mower up and it, of course, runs great with the replacement engine. The guy at the shop did say...

Has a Kawasaki FH engine on it, great engine. People say “my engine blew up” a lot. Often it is a broken connecting rod. When is the...

Hi Everyone, This is just a note for everyone regarding my experience. I wish I had more to share... I have a 2013 JD X360 that mainly...