Craftsman Garage's latest activity

No, the K92 is a horizontal drive transaxle. Check out the K58. It has 217 ft lb torque where the K46 has 171 ft lb torque and K57 has...

Hey, I would do that. The trip would be well worth it IMO. Husqvarnas tend to keep their value similar to JD. Did you buy your Riding...

I use Permatex Right Stuff and have had great results with it.

I like it when a DIY type uses clear bathtub silicone and then wonders why it still leaks. LOL

I have genuine 1-1/8 V-belt drive pulley from Craftsman rider if you are interested. It has the crank key made into it.

Incorrect setup, cable needs to be set, or need heavier throttle spring.

I suspect that the linkages are not hooked up correctly. This manual should help you double check your assemblies...

That probably bent the frame mounts if I had to guess.

Thanks very much for all the detailed replies. I'm going to take the tractor apart while waiting for the new belt to arrive and will...

Bull I personally know it matters as I maintained Husqvarna HWT625s for a local nursery where belt being off a by 1/4 caused problems...

I suspect the anti rotate bracket has come off or not connected allowing the tranny to tilt. Picture of frame to axle mounting bolts...

While I love to snag a deal on used mowers, I think there is a pro with new equipment that you know all of the history, condition...

Have you looked into Husqvarna Garden Tractors at all? I know they make, or made, a few models with fabricated 42/46/48" decks and came...

John Deeres also seem to retain their value really good, which is probably why that 10 year old X350 is still worth 2k.

Shoulda went for the X350...