CLStout's latest activity

  • C
    Compression is 140 on each cylinder.
  • C
    On the engine, just the coils and spark plugs. I'm not sure which side is backfiring. How can I test for this? I'm sure I have a...
  • C
    The coils are 2 years old, along with the wires. I haven't done a compression test yet. It's not using any oil and it's not building any...
  • C
    I have an intermittent misfire with this engine. Serial number is 406777, type is 0442 B1. I have replaced the spark plugs after setting...
  • C
    CLStout replied to the thread Drive belt.
    Sometimes that's hard for me to do. But I will control myself and check everything that's been mentioned.
  • C
    CLStout replied to the thread Drive belt.
    Will do that, thanks!
  • C
    CLStout replied to the thread Drive belt.
    You too
  • C
    CLStout replied to the thread Drive belt.
    I will do that, probably tomorrow. We're under a tornado warning and a thunderstorm watch, so I'm staying inside right now.
  • C
    CLStout replied to the thread Drive belt.
    I will do that, thanks. I've had this tractor since 2008. The only issue I had was the mounts for the transmission. They cracked and the...
  • C
    CLStout replied to the thread Drive belt.
    The belt and pulleys were replaced 2 years ago. I'm sure the belt is routed correctly. I imagine it's possible that the pulleys that I...
  • C
    CLStout replied to the thread Drive belt.
    Sir, I really appreciate your help. But I believe I may have given you the wrong impression. I watched the video you included, but it...
  • C
    CLStout replied to the thread Drive belt.
    If you mean a brake for the tractor, the brake is internal in the transmission. It does, however, have brakes that rest against the...
  • C
    CLStout replied to the thread Drive belt.
    Good tip. But this tractor has a K46 transmission, which has an internal brake. I hope I haven't misunderstood you.
  • C
    CLStout replied to the thread Drive belt.
    Thanks for the manual, and the advice. I will check the pulleys, guard and the belt.
  • C
    CLStout replied to the thread Drive belt.
    Model #936042. It's a 42" Ariens hydrostatic with a Briggs and Stratton Intek v-twin 20hp engine. Riding mower.
Back
Top