Recent content by Chuck M

  1. C

    JD LX188 Won't Start

    Update. Using car jumper cables, I verified the new solenoid is working and the starter is bad. Still have 12v at the solenoid ignition wire and the circuit board relay has stopped buzzing. I've ordered a new starter from Amazon. $46 for new starter with solenoid. Will have the starter in...
  2. C

    JD LX188 Won't Start

    Folks, I appreciate all the suggestions. To answer a few of your questions: Mod # MOL188X121982. The relay buzzes when the key is turned to start (all the way to the right) I found a complete circuit board on eBay for $156. Before I purchase a circuit board, I'm going to verify the starter...
  3. C

    JD LX188 Won't Start

    Update. Battery has 13.4v, The positive terminal on the solenoid has 12v. The ignition wire at the solenoid has 12v when the key is turned. The solenoid terminal that goes directly to the starter has no voltage even when the key is turned. Took the solenoid off and went to JD store. Gave them...
  4. C

    JD LX188 Won't Start

    Removed and reset the fuses. Removed and cleaned the battery connections. Checked the connections on the starter solenoid and all looks good. Grounds look good. Still getting a buzzing sound from one of the small gray electronic modules on the back of the ignition/control panel. Mower doesn't...
  5. C

    JD LX188 Won't Start

    Mower started right up as usual but noticed the tire low on air, so I pulled it into the garage to fill the tire. I shut the mower off, filled the tire and mower would not restart. All I get is a buzzing sound from the ignition switch. Battery is fully charged. Wondering if it is the starter...
Top