Recent content by Chuck E.

Hello all, My 2003 toro commercial ZT mower with Kohler Command Pro 26 EFI burnt up the PTO clutch. I purchased a new clutch but before I engaged it I checked the running voltage at the battery. The voltage was immediatly 14.4v and slowly progressed up to 14.8v at which time I shut it down so...

My Zmaster Z286E Battery died. Jumped it and it started, engaged PTO and it died. Re jumped it and it started and ran straight to garage but it died getting there. Now tried to jump and engine cranks but no electric fuel pump hum. Just got new battery. same scenario. Checked fuses all...

I have a Z286E Toro with1200 hrs. It jerks back and forth like a bucking bronko. Want to replace the steering dampening cylinders but I cannot find that part in the parts listing. Is there anything else I can do to suppress this erratic jerking? Thanks in advance for all your input. Chuck E.

Question about a 10 year old Toro commercial zero turn with a 62"groundskeeper deck. The center spindle bolt loosened up threw and destroyed the belt. I removed the spindle and found the top seal was destroyed but everything else seemed O.K. outside of the splines were worn so there was some...

Hello all, First message on this forum. Please be patient with me. I have a 2003 Toro Z286E Z-Master with 62" deck. Possibly what was called the GROUNDSKEEPER deck. 800 hours on the machine. New Gauge wheel axle bolts snap when replaced. The tang that the axle bolt attaches to has been...