Recent content by Chrisgixer2

Would it not take off?

Hi countax c300 contra rotating deck. link for illustration purposes https://www.gardentractorspares.co.uk/westwood-countax-tractor-38-xrd-cutting-deck-20100054 issue is a total lack of draw or suction, to pull the grass up, so that it cuts evenly across the width. The blades definitely...

Suggest either hydro locking ( pull the plug as said, turn it over, re fit plug try again. But you know all that ) or oil too thick. Is it worse when cold ?

Just to say, finally able to log in again, after numerous attempts emailing admin, after a received an email comedy thread link out of the blue…. And to say Thankyou for your help, I did manage to set the float as the diagram. Cheers all. 👍

If it’s recessed, as this one is, then it wouldn’t be OBVIOUS …. Was my point i presume they press the jets /seats in

Orders yesterday as it happens ? Filter is already installed

Unless they are recessed with a screw driver slot…. Or no slot as in this case ?

Hi thanks for reply came back to the machine today. Popped the air filter out and fuel in the carb inlet clearly visible again new float needle it is If I can find one

Ps once logged in all seems to be well nice and responsive

I wonder if yours is an older account that it’s remembered your email? And the fact mine is a new account means a restore was gone prior to my account set up. Hence the address was lost? All though my posts are still present

Sorry chaps had trouble logging in yes you were correct with your diagnosis. Took the air cleaner out and there was fuel sitting in the inlet. There’s a depression in the ventrury allowing fuel to puddle. With choke open the air speed through the crab isn’t quick enough to pull that puddle of...

Yes today is the first day I’ve got the homepage.

Hi all and admin esp who have clearly been dealing with some server issues lately. Please don’t see this as a complaint but I just wanted to let you know some issues still remain just in case not aware? i have opened a second account as I’ve been unable to get the forum to recognise my original...